FBO Flaskless automatic sand molding machine is an advanced equipment for the casting industry

FBO Flaskless automatic sand molding machine is an advanced equipment for the casting industry, the following is its operation process:

1. Preparation: Before starting the operation, it is necessary to prepare the required sand mold, mold and metal materials. Ensure equipment and work areas are clean and tidy, and check the operating status of equipment.

2. Model casting: First, in the model preparation area, the model of the object to be cast is placed in a specific position, and the mechanical arm grabs it and places it in the modeling area.

3. Sand injection: In the modeling area, the mechanical arm pours the pre-prepared sand around the model to form a sand mold. Sand is usually a special type of casting sand that can withstand high temperatures and pressures when it comes into contact with liquid metal.

4. Model release: After the formation of the sand mold, the mechanical arm will remove the model from the sand mold, so that the sand cavity leaves the accurate outline of the model.

5. Casting metal: Next, the mechanical arm moves the sand mold to the pouring area so that it is close to the casting equipment. The liquid metal will then be poured through a nozzle or other pouring device into the sand mold, filling the cavity of the model.

6. Cooling and curing: After the metal pouring is completed, the sand mold will continue to remain in the equipment to ensure that the metal can be fully cooled and cured. This process can take anywhere from a few minutes to a few hours, depending on the size of the metal and casting used.

7. Sand separation: After the metal is completely cooled and cured, the sand will be separated from the casting by the mechanical arm. This is usually done through vibration, shock, or other methods to ensure that the sand can be completely separated and reused.

8. Post-treatment: Finally, the casting is cleaned, trimmed, polished and other post-treatment processes to achieve the required surface quality and accuracy.

The operation process of FBO automatic sand molding machine can be controlled by program.