JN-FBO Vertical Sand Shooting, Molding and Horizontal Parting out of Box Molding Machine

The double-sided template ejection structure will turn the upper and lower sand boxes 90 degrees, and perfectly combine the shot sand into vertical direction and water bisection type.From the top of the sand bucket with pressure, pressure drop evenly distributed in the entire sand bucket, sand from the top down into the sand box, sand flow distance is short, so it has the best filling performance, sand pressure gradient is low, the sand in the bucket by the compact strength is small, easy to shoot sand, and not the production of shed and perforation. The sand deflector is installed in the sand mouth of the sand box to change the direction of the sand flow, effectively control the direction of the sand flow in the process of the sand flow, so that the sand flow avoids the template and refracts into the pussy of the shape, which not only protects the shape, but also powerfully fills the shadow part of the shape! It has been proved countless times in the production practice that the deflector is the best device to solve the above two problems very effectively!

The upper prefilled frame and the upper sand box, the lower prefilled frame and the lower sand box are one, and the thickness of the sand mold is completely determined by how much the compacted plate enters the sand box. Sand thickness selection menu is set on the man-machine communication operation panel of the molding machine control cabinet, so that the sand thickness can be conveniently set stepless according to the casting process requirements in production. The most economical use of molding sand. To prevent the compacted plate from sticking to sand in cold areas, a heating device is installed at the compacted plate.

In the molding process, each process requires different speed and pressure of action. We used pump-controlled electro-hydraulic servo technology. The high speed response of servo motor is utilized to realize the real-time oil supply mode, and the precise control of different pressure and flow rate required in each process is realized. Eliminate the energy source loss of high pressure throttling, overcome the problem of high pressure throttling caused by traditional "valve control servo" system, energy saving effect, while reducing the system oil temperature.